10 Mesh Viscose Spunlace

10 Mesh Viscose Spunlace

Weston 10 Mesh Viscose Spunlace nonwoven fabric, 100% viscose, customizable colors, fast absorption, stable strength, available in 8 mesh, 10 mesh, and 22 mesh versions.
Send Inquiry
Description
Technical Parameters

Weston 10 Mesh Viscose Spunlace Nonwoven Fabric Manufacturer

Weston 10 Mesh Viscose Spunlace Nonwoven is a hydroentangled all-viscose nonwoven fabric with an open mesh structure designed for controlled liquid release, efficient wiping, and stable wet strength.


 

Core Performance Attributes

Liquid absorption capacity: 680% Tested result 680% against a requirement of ≥ 600% (GB/T 24218.6). At 100 g/m², the fabric retains approximately 6.8× its own weight in water - relevant for wet-wipe, medical, and cleaning end uses.

Breaking strength: 76.1 N/5 cm (CD) / 99.8 N/5 cm (MD) Both exceed the ≥ 50 N/5 cm requirement per GB/T 24218.3. The MD:CD anisotropy ratio is approximately 1.3:1, acceptable for roll-to-roll converting operations.

No migratable fluorescence Confirmed under UV fluorescence detection equipment. Relevant for cosmetic, personal-care, and medical-adjacent applications where optical-brightener contamination is a concern.

Gram weight: 103.1 g/m² Target 100 g/m² ± 10% (i.e., 90–110 g/m²); measured result 103.1 g/m² per GB/T 24218.1. Consistent basis weight is a prerequisite for uniform liquid distribution in converting lines.

Color fastness: grade 3–4 Requirement ≥ 3 for dyed products (GB/T 250). Grade 3–4 is accepted by most wet-use and industrial laundry specifications.

Absorption time: 1.70 seconds Requirement ≤ 5 s for rapid-absorption products (GB/T 21655.1). The open-mesh aperture pattern accelerates liquid strike-through compared to a closed-face spunlace construction.

product-600-338


 

Product Specification - 10 Mesh, 100 g/m²

Test Item Unit Standard Requirement Tested Result Method
Fiber composition (viscose) % 100 Meets requirement Raw material verification
Gram weight g/m² 100 (± 10%) 103.1 GB/T 24218.1
Thickness (M > 50 g/m²) mm 0.88 (± 0.08 mm) 0.85 GB/T 24218.2
Liquid absorption capacity % ≥ 600 680 GB/T 24218.6
Moisture content (water regain) % ≤ 13 4.5 GB/T 9995
Color fastness (dyed products) grade ≥ 3 3–4 GB/T 250
Fluorescence migration - None Meets requirement UV detector
Breaking strength - CD N/5 cm ≥ 50 76.1 GB/T 24218.3
Breaking strength - MD N/5 cm ≥ 50 99.8 GB/T 24218.3
Breaking elongation - CD % ≤ 100 56.5 GB/T 24218.3
Breaking elongation - MD % ≤ 60 26.7 GB/T 24218.3
Width cm 105 ± 0.5 105 Ruler / roll measurement
Absorption time s ≤ 5 1.70 GB/T 21655.1
Flexibility - CD cm ≤ 5.0 4.28 GB/T 18318.1
Flexibility - MD cm ≤ 8.5 7.83 GB/T 18318.1
Functional test (post-wash) - No rupture, color change, or deformation after 10–15 min machine wash Meets requirement Visual inspection
Overall conclusion - - Qualified ✓ -

Test methods follow the GB/T 24218 series (equivalent to ISO 9073 for nonwovens). "/" indicates parameter not applicable to this variant.

100% viscose nonwoven Food Contact Certificate of Weston100% viscose nonwoven Food Contact Certificate of Weston ManufacturingFDA certificate about bamboo fabric material of WestonWESTON CERTIFICATE OF FSC50 gsm 100% viscose EU food contact50 gsm 100% viscose EU food contact ceritifacte


 

Mesh Count Comparison

Mesh count refers to the number of aperture openings per unit length in the cross-machine direction. Higher mesh count = smaller, more numerous holes = finer texture. All three variants share the same 100% viscose fiber composition and spunlace bonding process.

Parameter 8 Mesh 10 Mesh (this product) 22 Mesh
Aperture size (relative) Largest Medium Smallest
Liquid strike-through speed Fastest Fast (1.70 s tested) Moderate
Surface texture Open / coarse Moderate open structure Fine, soft, near-woven appearance
Typical basis weight range 40–120 g/m² 100 g/m² (this SKU) 50 g/m² white (EU food-contact cert)
Primary end uses Industrial wipes, filtration backing, wound-care secondary layer Household/personal wipes, cosmetic pads, damp cleaning cloths Cosmetic/facial wipes, food-contact dry liners, medical non-adhesive dressings
EU food-contact certificate Not applicable Not applicable Yes - 50 g/m², white, 100% viscose only

EU food-contact certificate - 22 mesh, 50 g/m², white, 100% viscose The 50 g/m² white 22-mesh variant holds a European food-contact compliance certificate, confirming suitability for dry and moist food-contact applications. This certificate applies specifically to: 100% viscose composition, 50 g/m² basis weight, white (undyed), 22-mesh count. Other basis weights, colors, or mesh counts are not covered without separate testing.


 

Ordering Parameters

Parameter Available Options
Mesh count 8 mesh · 10 mesh (this SKU) · 22 mesh
Basis weight 40–120 g/m² (confirm per mesh/weight combination)
Standard width 105 cm (± 0.5 cm). Custom widths on inquiry.
Standard color White (bleached)
Custom colors Blue · Green · Red · Yellow · Pink. Additional colors on inquiry.
Color fastness (dyed) ≥ Grade 3 (GB/T 250)
EU food-contact certification 22-mesh, 50 g/m², white only. Certificate provided on request.

 


 

Application Areas

Household cleaning wipes. The 680% absorption capacity and 1.70 s wetting speed support pre-moistened wipe converting. The open-mesh aperture pattern distributes cleaning solution evenly across the contact surface.

Personal care and cosmetic wipes. No migratable fluorescence and a flexibility rating of 4.28 cm (CD) meet requirements for facial cleansing sheets and makeup-removal wipes.

Industrial and technical wipers. Breaking strength of 76.1 N/5 cm (CD) and 99.8 N/5 cm (MD) provide resistance to tearing during machine-applied wiping operations.

Medical non-adhesive wound contact. 100% viscose, no binder agents, no optical brighteners. Suitable as a secondary wound layer where low linting and moisture management are required.

Agricultural and horticultural fleece. The aperture pattern allows air and light permeability. Colored variants are used as row covers or propagation sheets.

Food-contact dry lining (22-mesh variant only). The 50 g/m² white 22-mesh variant with EU food-contact certification is used as a dry liner for food packaging trays and display applications.

 


 

FAQ

What does "mesh count" mean, and does it affect tensile strength?

Mesh count describes the number of aperture openings per unit length in the cross-machine direction. A higher count produces more, smaller holes; a lower count produces fewer, larger holes. Aperture pattern primarily affects liquid distribution speed and surface texture. Tensile strength is more strongly determined by basis weight, fiber specification, and water-jet bonding energy than by mesh count. The 10-mesh 100 g/m² variant achieves CD/MD breaking strengths of 76.1 / 99.8 N/5 cm - both well above the 50 N/5 cm threshold.

The EU food-contact certificate only covers 22 mesh at 50 g/m² white. Does the 10-mesh variant require separate certification?

Yes. The certificate is issued for a specific tested sample: 22 mesh, 50 g/m², 100% viscose, white (undyed). A change in mesh count, basis weight, or the addition of a colorant constitutes a material change and requires independent testing and re-certification before any food-contact claim can be made.

What does color fastness grade 3–4 mean in practice?

Color fastness is measured per GB/T 250 using the grey scale for assessing staining. Grade 5 = no staining; grade 1 = severe staining. Grade 3–4 indicates slight to negligible color transfer under standard test conditions. For wet-wipe applications contacting skin or light-colored surfaces, grade 3–4 is the accepted industry minimum. If a stricter grade (e.g., 4 or 4–5) is required for a specific buyer specification, this must be confirmed with the factory at the sampling stage.

Is the fabric suitable for use after machine washing?

The functional test subjects the fabric to 10–15 minutes of machine washing followed by visual inspection for rupture, color change, and deformation - this sample passed all three criteria. It should be noted that viscose fibers have lower wet strength than polyester and are subject to progressive degradation with repeated laundering. This test is a pass/fail durability check, not a guarantee of long-term washing performance.

What is the minimum order quantity for custom colors or non-standard widths?

MOQ and lead times for custom colors and non-standard widths are determined per order, depending on dye batch size and machine configuration. White in standard width (105 cm) carries the shortest lead time as a stocked specification. Contact Weston Nonwoven with target basis weight, mesh count, color, width, and required quantity for a formal quotation.

 


 

 

Hot Tags: 10 mesh viscose spunlace, China, manufacturers, factory, customized, wholesale, Multipurpose Wave Pattern Spunlace Fabric Cloths, OEM Cleanroom Disposable Nonwoven Fabric, Reusable Spunlace Wipes For Family Cleaning Tasks, Light Green Nonwoven Wipe Material, 8 Mesh Spunlace Wipes For Mechanical Cleaning, 100 Viscose Check Printed Cloth

Send Inquiry
Send Inquiry