Anti-static Wipes For Electronics

Anti-static wipes for electronics

【Production Location】Hangzhou, China

【Surface resistance】105~109Ω

【Product Unit】Package

 [Product packaging] 50 pieces/bag

【Size】 3cmx3cm per sheet

【Material】50% pulp, 50% polyester. Good absorption performance.

【Anti static wipes for electronics features】

1. Anti-static dust-free wiping cloth to wipe low electrification voltage.

2. The anti-static dust-free wiping cloth is extremely soft and has excellent absorption performance;

3. Clean with anti-static dust-free wiping cloth and double-packed in a clean room

4. The anti-static dust-free wiping cloth is knitted from ultra-fine filament

5. The anti-static performance of the anti-static dust-free wipes decreases with the increase of washing times.

[anti-static wipes for electronics application] The anti-static dust-free wiping cloth can be used in purification workshops with grades 100 and 1000. Available for electronics and precision

 Used for wiping electrostatic sensitive components in machinery, LED and other industries.

For every anti-static product, there are requirements and precautions for its use. Dust-free cloth, as the most important product in industrial production, is different from ordinary wiping paper. Only when used correctly, can the product's effectiveness reach the best effect.

First of all, when using and unpacking, you need to wear dust-free gloves and a mask. However, for high-end dust-free cloths, the packaging must be unpacked in a clean environment during use, and the packaging bag must be cleaned before unpacking, especially the opening must be kept tidy.

Then, when wiping and using, wrap the four sides of the lint-free cloth inside. It is not advisable to wipe the object with the edge of the lint-free cloth. When using it, you can add a solvent for wiping, or you can use it directly.

Finally, when using in operation, the dust-free cloth must be kept flat and cannot be rubbed. When moving and wiping, try to fully contact the fibers of the cloth and the surface when wiping, and make sure to wipe in the same direction. Do not repeat the wipe from back and forth.